Spring – time to plant corn, first cutting of hay and spread manure. But before you climb on the tractor seat, think about adjusting your barn ventilation in anticipation of warmer weather. That may be as simple as rolling up sidewall curtains or it may entail the removal of plastic tarps or plywood that protected structures from those brisk winter breezes. Regardless of what it takes, make sure to open up your barns before the hot weather. The “comfort” zone for dairy cattle is 41 to 77ºF. Temperatures inside poorly ventilated barns could exceed that during the middle of the day even in early spring. Above 77ºF, cows are heat-stressed and dry matter intake suffers leading to a list of problems including reduced milk production, reduced reproductive efficiency and increased occurrence of metabolic disorders. The effects of heat stress can haunt you for the rest of the year – recall that 1 pound of peak milk translates into 225 to 240 pounds per lactation. For example, 4.5 pounds decrease in peak milk can lower the lactation yield by 1,000 pounds. So make sure you have the capability to cool early lactation cows. Ration adjustments may be needed to compensate for reduced dry matter intake. A great place to start addressing heat stress is the holding pen and the feed bunk. These two areas of higher cow traffic are prone to heat stress. Look for ways to provide fans and possibly sprinklers on cows at these locations. Below is a list of items to consider as the temperature rises: • Open up barns (remove sides, roll up curtains) to maximize natural ventilation. • Clean dust and residue off of fan cages as it can cause drag, which compromises the air-moving ability of the fan. (You would be amazed at how much better a clean fan can function relative to a dirty fan.) • Ask yourself if any structures around cow housing can be removed or modified to allow for better air flow. Do you really need that ivy-covered corn crib you haven’t used in 10 years? • Consider installation of a cow sprinkler system. (Your local dairy extension agent should be able to assist you in the design of these systems.) • Is your feed bunk and holding pen adequately shaded? Is this true at different times of the day as the position of the sun changes? PD —From Virginia Tech Dairy Pipeline, May 2007 M. Chase Scott, Extension Agent, Virginia Tech

As animal housing continues to move toward larger buildings, the research team at the Bioenvironmental and Structural Systems (BESS) Lab at the University of Illinois is working hard to keep up with industry trends. What this means is that the BESS Lab, which is known worldwide for testing livestock ventilation fans, is checking out larger and larger fans. “For most new construction, the standard ‘large’ fan is no longer 48 inches, but rather 50 to 54 inches,” said Steven Ford, a research engineer in the U of I Department of Agricultural and Biological Engineering and manager of the BESS Lab. “Airflow rates have increased proportionally, so fan airflow capacities are reaching the limit of our current test chamber.” Therefore, Ford has taken the lead on garnering industry support to build a larger test chamber. “We have funds committed from ag ventilation companies in Canada, Michigan, Indiana, Illinois and Alabama,” said Ford, “as well as in-kind equipment donations from companies in Illinois and Wisconsin.” The BESS Lab first opened in 1990 to provide unbiased engineering data to aid in the design, development and selection of efficient livestock ventilation fans. The lab tests ventilation fans sent to them by equipment manufacturers, or the manufacturers can rent the lab for a day, which Ford said is the most economical option. “Companies bring their fans to the lab, along with one or two people to assist with the set-up,” he said. “This helps keep costs low and industry participation high, which ultimately is good for the livestock producer.” Ford estimated that the lab has done more than 3,000 tests over the last 16 years. “We work with manufacturing companies around the country,” Ford said. “We’ve tested fans from Europe and even Australia. We’re fairly well- known throughout the ag ventilation industry.” Manufacturers have the option of listing their test data in “Agricultural Ventilation Fans: Performance and Efficiencies,” a biennial publication that provides performance test results of over 800 commercially available fans. This information can be accessed at the BESS website at www.bess.uiuc.edu, or a hardcopy of the book can be purchased through the Midwest Plan Service at www.mwps.org or the National Food and Energy Council at www.nfec.org as well. Ford pointed to the impact testing has had on ventilation fan performance over the years. “From 1991 to 2003, the average airflow performance of commercial livestock ventilation fans increased over 15 percent, and average electrical efficiency increased more than 20 percent,” he noted. “Those numbers tell me that manufacturers will improve their product performance when there is an active performance test lab.” Ultimately, said Ford, the goal is to help producers make more informed choices in ag ventilation systems. “The right fan will reduce odors, minimize the health risk of inhaling dust-laden air and optimize profits,” he concluded. “Efficient ventilation systems are essential to producers.” PD —Excerpts from University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES) News website Leanne Lucas, College of Agricultural Consumer and Environmental Sciences, University of Illinois

Since it’s time to cool cows again, it’s time to tune up your cow cooling systems. The first thing is to clean your fans; dirty fans reduce air speed by 50 percent. With the price of energy these days, it is important to keep the fans clean. It is not against the law to clean fans twice a year, especially if you have dusty roads near the barns. The faster the air movement around the cow, the faster the sprinkler water will evaporate from the cow’s skin and the cooler they will be. The cooler the cow is, the more food she will eat and the more milk she will produce. Fans will use the same amount of electricity if they are dirty or clean, so keep fans clean. The second part of the cow cooling process is the use of water to be evaporated off the cow body to take the heat with it and cool the cow. This means that you only need enough water to get the cow wet to the skin, then turn the water off and the fans will evaporate the water from the cow. Adding too much water reduces the efficiency of this process. The excess water runs off the cow, to the floor and then to the lagoon. To conserve water, you should adjust your sprinklers to just add enough water to soak the cow’s skin and start to run off the cow. The length of the off cycle should be long enough to let the fans evaporate the water off the cow and then start again. There are some very good sprinkling controls on the market that are easy to adjust and will add more cycles as heat increases. One of the [2006] Dairy Check-Off Projects was to determine the results of turning sprinklers off on one side of a barn at the Dairy Research Unit at midnight and turn them on again (by timer) for one hour after the cows came back from the milking parlor. Our nighttime cycle for this particular barn is one minute of water every ten minutes. This is a very short cycle compared to most dairies. The water savings was 600 gallons of water per cow from the end of May to the first week in October. On a 1000-cow dairy this will be 600,000 gallons of water saved, 1.2 million gallons on a 2,000-cow dairy. Remember that the less water you use, the drier the floors and the lower the humidity in the barn. Sprinklers are stationary, cows are mobile. All it takes is a timer in front of the sprinkler controller to shut off the water when cows are in the parlor, laying down, etc. If you don’t have timers on the sprinklers, you are wasting water, have soggy cows and are filling your lagoon. Less is more. PD —Excerpts from University of Florida Dairy Update, Vol. 7, No. 2 David R. Bray, Dairy Extension, University of Florida

A Focus on Energy Technical Data Sheet Animal barns require ventilation to keep cows and other farm animals comfortable and productive year- round. Ventilation provides fresh air, removes excess moisture and helps regulate seasonal temperature swings. The benefits are real and practical; ventilation helps farmers maintain healthy, productive animals.

The science behind building a ration that optimizes milk production and improves herd health is highly coveted. To formulate a performance-focused diet, nutritionists depend on quality feed ingredients as the basis for ration development.

Do extra vitamins help? Today there are fewer cows producing more milk. Cows have become more efficient.

Feeding straw to dry dairy cows has become a popular strategy to decrease dietary energy content and increase the bulk fill of the ration. The key reasons for doing this are to maintain pre-calving dry matter intake and to keep the rumen expanded to avoid a displaced abomasum post-calving.

It’s been snowing lately, and I have been complaining about the cold. I am not as young as I used to be, and my bones hurt.My circulation isn’t the best; our big house doesn’t have central heating, and the last batch of wood we gathered was wet. If you know anything about wet wood, it doesn’t burn very well.

I can’t remember the last time I heard someone say, “Boy, the weather has been almost perfect this year.” It seems like that used to happen every now and again when I was a kid.

Dairy cattle housed in freestall barns are normally separated from the feed delivery area by some sort of barrier. Barriers are important as they prevent cattle from walking and defecating on the feed.